Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 48 Number of Teeth
- 5.7 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Dia. | 3.938 in |
| Belt Size | L |
| Hub Projection | 1/2 in |
| Material | Cast Iron |
| Width Across Teeth | 0.563 in |
| Type | CF |
| Pitch Diameter | 5.73 in |
| Outside Dia. | 5.7 in |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Hub Type | B |
| Bushing Type | Taper-Lock |
| Belt Pitch | 0.375 in |
| Belt Width | 0.5 in |
| Length Through Bore | 1.25 in |
| Bore Range [Max] | 2 in |
| Bushing Series | 2012 |
| No. of Teeth | 48 |
| Bore Type | Bushed |
| Weight | 4.88 LB |
| EAN or UPC | 697950083971 |
