Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 40 Number of Teeth
- 6.312 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.5 in |
| Belt Size | H |
| Length Through Bore | 1.75 in |
| Type | KF |
| No. of Teeth | 40 |
| Hub Type | A |
| Bushing Type | Taper-Lock |
| Belt Width | 2 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Bore Range [Max] | 2.5 in |
| Outside Dia. | 6.312 in |
| Width Across Teeth | 2.094 in |
| Pitch Diameter | 6.366 in |
| Material | Cast Iron |
| Bushing Series | 2517 |
| Bore Range [Min] | 0.5 in |
| Weight | 9.9 LB |
| EAN or UPC | 697950083865 |
