Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 30 Number of Teeth
- 4.721 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 1.25 in |
| Type | KF |
| Belt Pitch | 0.5 in |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Belt Size | H |
| Belt Width | 1.5 in |
| Material | Cast Iron |
| Outside Dia. | 4.721 in |
| Bushing Type | Taper-Lock |
| Pitch Diameter | 4.775 in |
| Bushing Series | 2012 |
| Width Across Teeth | 1.563 in |
| Hub Type | A |
| Bore Type | Bushed |
| No. of Teeth | 30 |
| Weight | 5.21 LB |
| EAN or UPC | 697950083674 |
