Find a Service Center
- 0.875 in Belt Pitch
- 2 in Belt Width
- 24 Number of Teeth
- 6.575 in Outside Diameter
- XH Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| Type | KF |
| Belt Size | XH |
| Hub Type | A |
| Width Across Teeth | 2.25 in |
| Length Through Bore | 2 in |
| Material | Cast Iron |
| Bore Range [Max] | 3 in |
| Pitch Diameter | 6.685 in |
| Bore Range [Min] | 0.875 in |
| Bushing Series | 3020 |
| Belt Width | 2 in |
| Outside Dia. | 6.575 in |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Belt Pitch | 0.875 in |
| No. of Teeth | 24 |
| Weight | 11.5 LB |
| EAN or UPC | 697950083469 |
