Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 24 Number of Teeth
- 3.766 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.5 in |
| Hub Type | A |
| Length Through Bore | 1 in |
| No. of Teeth | 24 |
| Width Across Teeth | 1.063 in |
| Outside Dia. | 3.766 in |
| Pitch Diameter | 3.82 in |
| Bushing Series | 2012 |
| Bore Type | Bushed |
| Bushing Type | Taper-Lock |
| Type | KF-1 |
| Belt Size | H |
| Belt Width | 3 in |
| Bore Range [Max] | 1.625 in |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Hub Projection | 0.312 in |
| Weight | 2.3 LB |
| EAN or UPC | 697950083391 |
