Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 16 Number of Teeth
- 2.492 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 0.875 in |
| Belt Width | 3 in |
| Bushing Type | Taper-Lock |
| Outside Dia. | 2.492 in |
| Hub Type | A |
| No. of Teeth | 16 |
| Type | KF-1 |
| Bore Range [Min] | 0.5 in |
| Width Across Teeth | 1.063 in |
| Bore Type | Bushed |
| Bushing Series | 1008 |
| Finished Bore | N/A |
| Material | Steel |
| Hub Projection | 0.437 in |
| Belt Pitch | 0.5 in |
| Pitch Diameter | 2.546 in |
| Bore Range [Max] | 1 in |
| Belt Size | H |
| Weight | 1.3 LB |
| EAN or UPC | 697950083124 |
