Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 72 Number of Teeth
- 8.567 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
- Agitators and mixers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1.25 in |
| Outside Dia. | 8.567 in |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.375 in |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Bushing Series | SD |
| Belt Width | 1 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Bushed |
| Belt Size | L |
| Bushing Type | Quick Disconnect |
| Hub Type | A |
| No. of Teeth | 72 |
| Material | Cast Iron |
| Hub Dia. | 3 3/8 in |
| Pitch Diameter | 8.594 in |
| Type | G |
| Weight | 7.2 LB |
| EAN or UPC | 697950122915 |
