Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 44 Number of Teeth
- 6.951 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Pumps
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Type | Bushed |
| Bore Range [Max] | 2 5/8 in |
| Type | HF-1 |
| No. of Teeth | 44 |
| Belt Size | H |
| Hub Type | A |
| Length Through Bore | 1.813 in |
| Belt Width | 1 1/2 in |
| Bushing Type | Quick Disconnect |
| Hardened Teeth | With Hardened Teeth |
| Pitch Diameter | 7.003 in |
| Bushing Series | SK |
| Finished Bore | N/A |
| Belt Pitch | 1/2 in |
| Bore Range [Min] | 1/2 in |
| Outside Dia. | 6.9510 in |
| Material | Cast Iron |
| Weight | 11.0 LB |
| EAN or UPC | 697950152226 |
