Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 42 Number of Teeth
- 2.654 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Pitch | 0.2 in |
| Bushing Type | None |
| Finished Bore | N/A |
| Belt Size | XL037 |
| Bore Range [Min] | 0.312 in |
| Set Screw Size | 10-24 x 3/16 |
| Outside Dia. | 2.654 in |
| Hardened Teeth | Without Hardened Teeth |
| Type | D-2 |
| Bore Range [Max] | 1.187 in |
| Length Through Bore | 1 in |
| Hub Projection | 0.218 in |
| Material | Steel |
| No. of Screws | 2 |
| Bushing Series | N/A |
| Bore Type | Bushed |
| No. of Teeth | 42 |
| Pitch Diameter | 2.674 in |
| Belt Width | 0.25 in, 0.375 in |
| Hub Type | B |
| Hub Dia. | 1 1/2 in |
| Weight | 0.31 LB |
| EAN or UPC | 697950117577 |
