Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 30 Number of Teeth
- 3.595 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | N/A |
| Hub Dia. | 2 7/8 in |
| Bore Range [Max] | 1.625 in |
| Belt Size | L050 |
| Outside Dia. | 3.595 in |
| Belt Width | 0.5 in |
| Belt Pitch | 0.375 in |
| Length Through Bore | 1.5 in |
| No. of Teeth | 30 |
| Finished Bore | N/A |
| Bore Type | Reborable |
| Hub Type | B |
| Pitch Diameter | 3.581 in |
| Hub Projection | 3/4 in |
| Bushing Type | None |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Type | PB |
| Hardened Teeth | Without Hardened Teeth |
| Weight | 2.7 LB |
| EAN or UPC | 697950151915 |
