Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 28 Number of Teeth
- 3.356 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 28 |
| Bushing Type | None |
| Bore Range [Min] | 0.625 in |
| Pitch Diameter | 3.342 in |
| Bore Range [Max] | 1.875 in |
| Outside Dia. | 3.356 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 2.25 in |
| Belt Width | 1 in |
| Bushing Series | N/A |
| Belt Pitch | 0.375 in |
| Hub Projection | 1 in |
| Hub Type | B |
| Hub Dia. | 2 3/4 in |
| Belt Size | L100 |
| Finished Bore | N/A |
| Material | Steel |
| Type | PB |
| Bore Type | Reborable |
| Weight | 3.6 LB |
| EAN or UPC | 697950151854 |
