Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 28 Number of Teeth
- 3.356 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Dia. | 2 3/4 in |
| Hub Projection | 3/4 in |
| No. of Teeth | 28 |
| Type | PB |
| Bore Type | Reborable |
| Pitch Diameter | 3.342 in |
| Belt Pitch | 0.375 in |
| Bushing Type | None |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.5 in |
| Bushing Series | N/A |
| Finished Bore | N/A |
| Belt Width | 0.5 in |
| Material | Steel |
| Bore Range [Min] | 0.5 in |
| Bore Range [Max] | 1.625 in |
| Belt Size | L050 |
| Outside Dia. | 3.356 in |
| Weight | 2.5 LB |
| EAN or UPC | 697950151816 |
