Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 28 Number of Teeth
- 3.314 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Fans and blowers
- Paper machinery
- Pumps
- Agitators and mixers
- Compressors
- Conveyors
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 3.3140 in |
| Pitch Diameter | 3.342 in |
| Bushing Series | SH |
| Hardened Teeth | With Hardened Teeth |
| Length Through Bore | 3/4 in |
| No. of Teeth | 28 |
| Bore Type | Bushed |
| Belt Pitch | 3/8 in |
| Bore Range [Min] | 1/2 in |
| Bore Range [Max] | 1 5/8 in |
| Belt Size | L |
| Finished Bore | N/A |
| Bushing Type | Quick Disconnect |
| Type | GF |
| Belt Width | 1/2 in |
| Material | Steel |
| Hub Type | A |
| Weight | 1.13 LB |
| EAN or UPC | 697950151823 |
