Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Fans and blowers
- Paper machinery
- Pumps
- Conveyors
- Compressors
- Agitators and mixers
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | QD |
| Hub Type | B |
| Bushing Type | Quick Disconnect |
| Bushing Series | JA |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.062 in |
| Material | Steel |
| Outside Dia. | 2.3570 in |
| Pitch Diameter | 2.387 in |
| Belt Pitch | 3/8 in |
| Bore Range [Min] | 1/2 in |
| Finished Bore | N/A |
| Bore Range [Max] | 1 1/4 in |
| Belt Size | L |
| Bore Type | Bushed |
| No. of Teeth | 20 |
| Belt Width | 1/2 in |
| Weight | 0.94 LB |
| EAN or UPC | 697950151281 |
