Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 18 Number of Teeth
- 1.126 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 1.1260 in |
| No. of Screws | 2 |
| Hub Type | B |
| No. of Teeth | 18 |
| Bushing Type | None |
| Type | DF-1 |
| Pitch Diameter | 1.146 in |
| Finished Bore | N/A |
| Belt Width | 1/4 in, 3/8 in |
| Belt Size | XL |
| Hub Dia. | 0.812 in |
| Bore Range [Max] | 9/16 in |
| Bushing Series | N/A |
| Material | Steel |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 0.781 in |
| Belt Pitch | 0.200 in |
| Set Screw Size | 8-32 x 1/8 |
| Hub Projection | 0.218 in |
| Bore Range [Min] | 1/4 in |
| Bore Type | Bushed |
| Weight | 0.13 LB |
| EAN or UPC | 697950105581 |
