Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| Hub Dia. | 1.437 in |
| Bushing Series | N/A |
| Belt Size | L |
| Bore Range [Max] | 1 1/8 in |
| Finished Bore | N/A |
| Bushing Type | None |
| Bore Range [Min] | 1/2 in |
| No. of Screws | 1 |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeth | 16 |
| Belt Width | 1 in |
| Belt Pitch | 3/8 in |
| Hub Type | B |
| Length Through Bore | 1 7/8 in |
| Type | PB |
| Pitch Diameter | 1.910 in |
| Outside Dia. | 1.8800 in |
| Bore Type | Bushed |
| Hub Projection | 5/8 in |
| Set Screw Size | 1/4-20 x 1/4 |
| Weight | 1.0 LB |
| EAN or UPC | 697950101026 |
