Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 14 Number of Teeth
- 1.641 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 1 in |
| Finished Bore | N/A |
| Belt Pitch | 0.375 in |
| Hub Type | B |
| Outside Dia. | 1.641 in |
| Belt Size | L100 |
| Length Through Bore | 1.75 in |
| Bore Range [Min] | 0.375 in |
| Type | PB |
| Material | Steel |
| Bore Type | Bushed |
| Hub Projection | 1/2 in |
| No. of Teeth | 14 |
| Pitch Diameter | 1.671 in |
| Hub Dia. | 1 1/8 in |
| Bore Range [Max] | 0.875 in |
| Bushing Type | None |
| No. of Screws | 1 |
| Bushing Series | N/A |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | 10-24 x 3/16 |
| Weight | 1.0 LB |
| EAN or UPC | 697950097930 |
