Find a Service Center
- 0.375 in Belt Pitch
- 0.5 in Belt Width
- 10 Number of Teeth
- 1.166 in Outside Diameter
- L050 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L050 |
| Bore Range [Max] | 0.562 in |
| Hardened Teeth | Without Hardened Teeth |
| Finished Bore | N/A |
| Material | Steel |
| Type | PB |
| No. of Teeth | 10 |
| Hub Type | B |
| Outside Dia. | 1.166 in |
| Set Screw Size | 10-24 x 3/16 |
| Belt Pitch | 0.375 in |
| Bore Type | Bushed |
| Pitch Diameter | 1.194 in |
| Bushing Type | None |
| Bushing Series | N/A |
| Hub Dia. | 0.812 in |
| Length Through Bore | 1.125 in |
| Bore Range [Min] | 0.375 in |
| No. of Screws | 1 |
| Hub Projection | 0.313 in |
| Belt Width | 0.5 in |
| Weight | 0.22 LB |
| EAN or UPC | 697950088242 |
