Find a Service Center
Alternate Products
- 0.38 in Inner Diameter
- 1.38 in Outer Diameter
- 0.81 in Overall Width
- Double Shielded Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| Clamping Dia. | 3/4 in |
| Inside Diameter Tolerance [Max] | 0.3752 in |
| Speed (Max) Grease | 2600 rpm |
| Lubricant | Grease |
| Shaft Diameter - Press Fit [Min] | 0.3751 in |
| Shaft Diameter - Slip Fit [Min] | 0.3743 in |
| Precision Class | P0 |
| Inside Diameter Tolerance [Min] | 0.3746 in |
| Relubrication Feature | No |
| I.D. | 3/8 in |
| Inch/Metric | Inch |
| Outer Ring Width | 0.75 in, 19.05 mm |
| Enclosure | Unsealed |
| Component | Assembly |
| Shaft Diameter - Slip Fit [Max] | 0.3747 in |
| Inner Ring Width | 0.81 in, 20.64 mm |
| Operating Temperature [Min] | -22 ˚F |
| Operating Temperature [Max] | 230 ˚F |
| Roller Width | 3/4 in |
| Dynamic Capacity | 4740 lbf |
| O.D. Type | Straight |
| Overall Width Tolerance [Max] | 0.8175 in |
| No. of Rows | Single |
| Shaft Diameter - Press Fit [Max] | 0.3755 in |
| Overall Width | 13/16 in |
| Limiting Speed | 2600 rpm |
| Working Load | 4500 lbf |
| Roller Dia. | 1 3/8 in |
| O.D. | 1.38 in, 34.93 mm |
| Relubricatable | No |
| Roller Type | Straight |
| Material | Steel |
| Overall Width Tolerance [Min] | 0.8025 in |
| Rolling Element | Needle Roller |
| Series | YCR |
| Self Aligning | No |
| Bearing Type | Needle Bearing |
| Bore Type | Round |
| Weight | 0.32 LB |
| EAN or UPC | 605790214523 |
