Find a Service Center
- 0.63 in Inner Diameter
- 0.88 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Dynamic Load Rating | 8.05 kN |
| Radial Internal Clearance | N/A |
| Oil Hole | w/o Oil Hole |
| I.D. | 0.63 in, 15.9 mm |
| Relubrication Feature | No |
| No. of Rows | Single |
| O.D. Type | Straight |
| End Type | Open End |
| Housing Bore [Min] | 0.8745 in |
| Shaft Dia. [Min] | 0.6245 in |
| Operating Temperature [Max] | 230 ˚F |
| Cage Material | Polymer |
| Overall Width | 1 in, 25.4 mm |
| Precision Ground | Yes |
| Bearing Design | Roller Clutch |
| Static Load Rating | 8.14 kN |
| Housing Bore [Max] | 0.8755 in |
| Cage Type | Window |
| Outer Ring Width | 1 in, 25.4 mm |
| Series | RCB |
| Bore Type | Round |
| Relubricatable | No |
| Precision Class | ABEC 1 |
| Bearing Material | 1014 Steel |
| Tolerance | Iso Class 0 (RBEC 1) |
| Rolling Element | Roller |
| Enclosure | Open |
| Housing Shoulder Diameter | 1.2 in |
| Operating Temperature [Min] | -22 ˚F |
| Working Load | 914 lbf |
| Radial Internal Clearance Specification | N/A |
| Capacity | Standard Capacity |
| Speed (Max) Oil | 14000 rpm |
| O.D. | 0.88 in, 22.24 mm |
| Clamp Torque | 143 lbf |
| Lubricant | Rust Preventative |
| Mounting Method | Press Fit |
| Origin | Roller Clutches |
| Component | Assembly |
| Shaft Dia. [Max] | 0.625 in |
| Self Aligning | No |
| Weight | 0.006 LB |
| EAN or UPC | 605790197116 |
