RC-061008-FS

Single Row Steel Needle Roller Bearing

Item #101681848

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Relubricatable	No
Bearing Material	1014 Steel
Shaft Dia. [Max]	0.375 in
Clamp Torque	45.4 lbf
Housing Bore [Max]	0.6255 in
Outer Ring Width	0.5 in, 12.7 mm
Self Aligning	No
Housing Bore [Min]	0.6245 in
Housing Shoulder Diameter	0.88 in
Cage Material	Nylon
Enclosure	Open
Series	RC
Component	Assembly
No. of Rows	1
Bearing Design	Roller Clutch
I.D.	3/8 in
Lubricant	Rust Preventative
Relubrication Feature	No
Tolerance	Iso Class 0 (RBEC 1)
Cage Type	Window
End Type	Open End
Capacity	Standard Capacity
Radial Internal Clearance Specification	N/A
Oil Hole	w/o Oil Hole
Precision Class	ABEC 1
Speed (Max) Oil	18000 rpm
Operating Temperature [Min]	-22 ˚F
Bore Type	Round Bore, Inch Type
Rolling Element	Roller
O.D. Type	Straight
Overall Width	0.5 in, 12.7 mm
O.D.	0.625 in
Precision Ground	Yes
Mounting Method	Press Fit
Operating Temperature [Max]	230 ˚F
Shaft Dia. [Min]	0.3745 in
Origin	Roller Clutches
Radial Internal Clearance	N/A
Weight	0.003 LB
EAN or UPC	605790205699