
- Track Roller Assembly Bearing
- 0.38 in Roller Width
- Double Sealed Enclosure
features
- Best used for high radial loads and where the bearing rolling motion occurs on the outer diameter surface
- Made from premium high carbon, high chromium steel
- Uses a full complement of greased rollers that offer maximum radial load capacity
- Carburized steel studs (CR inch series) and Heavy Duty Studs (CRH inch series) offers better fracture resistance
- Screwdrive slot in head is standard (CR, CRH series), Hex slot is available (CRB, CRHB series)
- Seals ("S") are available, Crowned ODs ("C") are avaialable, Eccentric Studs ("E") are available by adding letter(s) after CR or CRH (CRS, CRSB, CRHB, etc..) for the inch product
- Avaialable with caged rollers (KRV series) or full complement of rollers (KV, NUTR series) for metric product
- Avaialable with crowned od (standard) and hex head (standard) and seals (.2RS) for metric product (KR, KRV, NUTR series)
Rolling Element | Needle Roller |
Self Aligning | No |
Lubricant | Grease |
Limiting Speed | 7500 rpm |
Mounting Overhang | 0.44 in |
Precision Class | P0 |
Threads per Inch | 32 |
Relubricatable | No |
Speed (Max) Grease | 7000 rpm |
Clamping Dia. | 0.2969 in |
No. of Rows | Single |
Relubrication Feature | Grease Zerk |
Material | Steel |
Roller Dia. | 1/2 in |
Thread Pitch | N/A |
O.D. Type | Crowned |
Dynamic Load Rating | 1060 lbf |
Fillet Radius | 0.01 in, 0.25 mm |
Roller Type | Crowned |
Roller Width | 0.38 in, 9.53 mm |
Inch/Metric | Inch |
Operating Temperature [Max] | 230 ˚F |
Series | CR |
Stud Dia. | 0.19 in |
Bearing Type | Track Roller Assembly |
Stud Length | 0.5 in, 12.7 mm |
End Type | Hex Hole |
Clamp Torque | 8 lbf |
Overall Width | 0.38 in, 9.53 mm |
Working Load | 306 lbf |
Overall Length | 1.03125 in |
Enclosure | Double Sealed |
Component | Assembly |
Thread Size | #10 |
Stud Type | Standard |
Thread Type | UNF |
Operating Temperature [Min] | -22 ˚F |
Weight | 0.004 LB |
EAN or UPC | 605790194573 |
