Mechanically retained triple-lip seal with stainless steel flinger
Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
Patented Maxlife cage is made from a high temperature polymer material, and its one-of-a-kind, compartmentalized design ensures that grease pockets are maintained around the balls, leading to less likelihood for grease washout and cooler operating temperatures
Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
65° set screw spacing offers an optimum balance between locking force and inner ring stress
Open and closed safety covers available
compliances
Conforms to FDA/USDA specifications
Dynamic Load Rating
5,759.00 lbf
Insert Type
Corrosion-Resistant Insert
Series
P2BSCEZ
Base Height
23/32 in
Mounted Unit Duty
Corrosion Resistant-Duty
Bearing Type
Ball Bearing
Housing Construction
1 Piece
Static Load Rating [Max]
3,065.00 lbf
Bolt Hole Spacing
4 31/32 in
Base Length
6 35/64 in
Length Through Bore
1 17/32 in
Inch/Metric
Inch
Pillow Block Type
Thru-Bolt
End Type
Open End
Outer Ring Size
207
Base Width
1 7/8 in
Bolt Hole Spacing Range [Min]
4 13/16 in
Center Line to Base Dimension [Min]
1 7/8 in
Bolt Size
1/2 in
Bolt Hole Length
23/32 in
Locking Device
Setscrew Locking Collar
Bolt Hole Spacing Range [Max]
5 1/8 in
Collar O.D.
1 27/32 in
Housing Height
3 57/64 in
Lubrication
Relubricatable
Bearing Design
Non-Expansion
Bolt Holes
2
Center of Bearing to Front of Inner Ring
1 1/32 in
Shaft Dia.
1 1/4 in
Housing Material
Polymer
Misalignment Range
±2°
Temperature Range [Max]
225 °F
Center of Bearing to Back of Inner Ring
1/2 in
Seal Type
PROGUARD™ Plus Contact Seals w/Flingers
Weight
1.88 LB
EAN or UPC
782475986101
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
