Find a Service Center
- 5 mm Belt Pitch
- 15 mm Belt Width, 112 Teeth
- 6.973" Outside Diameter
- SDS Bushing Required
- w/a Bore Range of 1/2" to 2"
applications
- Agitators
- Mixers
- Brick and clay machinery
- Compressors
- Conveyors
- Blowers
- Laundry machinery
- Machine tools
- Paper machinery
features
- Quiet operation
- Compact
- Positive drive, no slip
- No lubrication required
- Nonstretch
- Corrosion-resistant
- Abrasion-resistant
- Virtually no backlash
- Clean operation
- Low maintenance
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Type | C1 |
| Sprocket Width | N/A |
| No. of Teeth | 112 |
| Belt Pitch | 5 mm |
| Finished Bore | N/A |
| Belt Width | 15 mm |
| Bushing Type | QD |
| Outside Dia. | 6.973 in |
| Bore Range [Min] | 0.5 in |
| Pitch Diameter | 7.018 in |
| Bushing Series | SDS |
| Bore Range [Max] | 2 in |
| Bore Type | Taper-Lock and QD Bushed |
| Weight | 5.9 LB |
| EAN or UPC | 782475743384 |
