Find a Service Center
- 3/8" Pitch
- L Belt Size
- 1/2" Belt Width
- 14 Teeth
- 1.671" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Bore Type | Reborable |
| Bore Range [Max] | 0.875 in |
| Outside Dia. | 1.641 in |
| Belt Pitch | 0.375 in |
| Bushing Type | None |
| Bore Range [Min] | 0.375 in |
| Hub Dia. | 1.13 in |
| Hub Projection | 1/2 in |
| Belt Size | L |
| Bushing Series | N/A |
| Type | DF-1 |
| Pitch Diameter | 1.671 in |
| Length Through Bore | 1.25 in |
| Finished Bore | N/A |
| Belt Width | 0.5 in |
| No. of Teeth | 14 |
| Weight | 0.55 LB |
| EAN or UPC | 782475087938 |
