Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mechanical Options | None |
| Spool Spring Arrangement Code | C |
| Electrical Options | None |
| Port Restrictor Plugs | None |
| Overrides | No Overrides |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Electrical Connection | Ground Terminal |
| Seal Material | Buna-N |
| Leakage | Standard Performance |
| AC/DC | AC |
| Electrical Options Code | None |
| Surge Suppressor/Damper | None |
| Indicator Lights | No |
| Flow Direction Code | 4 |
| Operation | Solenoid Operated |
| Temperature Range [Max] | 122 °F |
| Design No. | 50 |
| Compatible Fluids | Petroleum Oil |
| Tank Port Rating | 1000 |
| Actuation Identification | Solenoid A, Solenoid B |
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Cycle Rate [Max] | N/A |
| Port T Pressure Rating | 1000 psi |
| No. of Stages | Single Stage |
| Coil Type | No Coil |
| NFPA Size | D05 |
| Performance | Standard Performance |
| Manual Override | Plain Override |
| Center Position | P Blocked, A & B to T |
| Solenoid Air Gap Code | None |
| Coil Rating Code | None |
| Model No. | DG4S4-0133C-50 |
| Spool Code | 33 |
| Valve Type | Standard-Duty |
| Pilot Valve Type | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Actuator Type | Solenoid |
| Fluid Cleanliness | 19/17/14 micron |
| Rated Flow [Max] | 24 gal/min |
| Mounting | Subplate/Manifold Mount |
| Crossover | P Blocked, A or B to T |
| Function | 3-Position Spring Centered |
| Solenoid | Double |
| Reducer Module | N/A |
| Pilot/Drain | None |
| Body Material | Gray Iron |
| Pressure [Max] | 11000 psi |
| Temperature Range [Min] | 68 °F |
| Weight | 5.75 LB |
