These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Function
3-Position Spring Centered
Port Restrictor Plugs
None
EN Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Solenoid Code
G
Pilot Valve Type
N/A
Pilot/Drain
None
Reducer Module
N/A
Cycle Rate [Max]
N/A
Overrides
No Overrides
Crossover
All Ports Open, Restricted
Spool Code
8
Housing Code
None
Pressure Port Check Valve Pressure
N/A
Center Position
P to T, A & B Blocked
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
None
Electrical Options
None
Electrical Connection
No Connector
Actuator Type
Solenoid
Solenoid Energization Code
V
Spool Indicator Switch Code
None
AC/DC
DC
Spool Spring Arrangement Code
C
Pressure [Max]
5075 psi
Port T Code
7
Electrical Connector Code
None
Indicator Lights
No
Manual Override Option Code
H
Solenoid
Double
Seal Material
Buna-N
Response Type
Standard Response
Rated Flow [Max]
21 gal/min
Function Code
8
Valve Type
High-Performance
Design No.
61
Voltage & Frequency
12 VDC
Coil Type Code
SP2
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Coil Rating Code
G
Operation
Solenoid Operated
Port Restrictor Plug Code
None
Coil Type
Dual 6.3 mm Spade
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
