Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Cavity | C-10-2 |
| Seal Kit Buna | 565803 |
| Model No. | RV1-10-F-0-30/18 |
| Valve Material | Cartridge only |
| Seal Kit Viton | 566086 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Installation | Screw-in Cartridge |
| Manufacturer Part No. | RV1-10-F-0-36/18 |
| Temperature Range [Max] | 248 °F |
| Cracking Pressure [Max] | 3600 psi |
| Body Type | 1 |
| Pilot Ratio | 100:1 |
| Port Size | Cartridge Only |
| Port Type | Cartridge Only |
| Pressure [Max] | 3046 psi |
| Temperature Range [Min] | -40 °F |
| Recommend Filtration Level | 18/16/13 microns |
| Operating Pressure [Min] | 493 psi |
| Adjustment Type | Factory Set |
| Type | Pressure Relief Valve |
| Series | RV1-10 |
| Leakage | 0.25 cc/min |
| Seal Material | Buna-N |
| Pressure Setting | 1769 psi |
| Cracking Pressure [Min] | 500 psi |
| Flow [Max] | 8 gal/min |
| Style | Poppet |
| No. of Housing Ports | 2 |
| No. of Valve Ports | 2 |
| Operation | Direct Acting |
| Housing Material | Cartridge Only |
| Operating Pressure [Max] | 3046 psi |
| Weight | 0.48 LB |
