These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Seal Material
Buna-N
AC/DC
DC
Electrical Connection
DIN 43650
Voltage & Frequency
12 VDC
Port T Pressure Rating
3000 psi
Port Restrictor Plugs
None
Design No.
60
Spool Indicator Switch Code
None
Solenoid
Double
Port T Code
7
Pilot/Drain
None
Surge Suppressor/Damper
None
Coil Type Code
U
Response Type
Standard Response
Coil Rating Code
G
Spool Spring Arrangement Code
C
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Coil Type
DIN 43650
EN Code
None
Reducer Module
N/A
Solenoid Indicator Lights Code
None
Solenoid Code
G
Solenoid Energization Code
None
Electrical Connector Code
None
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Electrical Options
None
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Spool Shift Timing
N/A
Function
3-Position Spring Centered
Housing Code
None
Port Restrictor Plug Code
None
NFPA Size
D03
Center Position
P Blocked, A & B to T
Crossover
P Blocked, A or B to T
Manual Override Option Code
H
Overrides
No Overrides
Indicator Lights
No
Spool Code
6
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Function Code
6
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
