These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plug Code
None
Response Type
Standard Response
Electrical Connection
DIN 43650
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Electrical Connector Code
None
Solenoid Energization Code
None
AC/DC
AC
Center Position
P Blocked, A & B to T
Solenoid Indicator Lights Code
None
Coil Rating Code
A
Voltage & Frequency
110 VAC – 50 Hz
Function Code
6
Manual Override Option Code
None
Pilot/Drain
None
Design No.
60
Valve Type
High-Performance
Spool Code
6
Coil Type Code
U
NFPA Size
D03
Housing Code
None
Solenoid Code
A
Surge Suppressor/Damper
None
Rated Flow [Max]
21 gal/min
Pressure [Max]
5075 psi
Seal Material
Buna-N
Function
2-Position Spring Offset, End to Center
Overrides
No Overrides
EN Code
None
Mechanical Options
None
Spool Spring Arrangement Code
B
Electrical Options
None
Coil Type
DIN 43650
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Crossover
P Blocked, A or B to T
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Solenoid
Single
Port T Code
6
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Operation
Solenoid Operated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
