868858

Vickers SystemStak™ Dual Relief Valve

Item #101989963

No Gauge Port

Dual Relief Limited in Port B

Drained into Port A

60-2,900 psi

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Remote Control Port	No
Pressure Limited In, Dual	Port B
Adjustment Type	Screw w/ Locknut
Operating Pressure [Max]	4500 psi
Interface	D05
Port Drained Into, Dual	Port A
Model No.	DGMC2-5-AB-CW-BA-CW-30
Design No.	30
External Drain	No
Port Drained Into	Port B
Pressure Adjustment Range, Dual (psi)	60-2,900
Pressure Limited In	Port A
Valve Type	Dual (Cross Port) Relief Valve "A" to "B" & "B" to "A"
External Drain, Dual	No
Relief Function	Dual
Gage Port	None
Adjustment Type, Dual	Screw w/Locknut
Family Name	Vickers D05 SystemStak™ Valves
Flow [Max]	32 gal/min
Pressure Adjustment Range (psi)	60 to 2,900
Manufacturer Part No.	DGMC2-5-AB-CW-BA-CW-30
Weight	1.0 LB