These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
NFPA Size
D03
Port Restrictor Plug Code
None
Coil Rating Code
B
Spool Code
6
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Overrides
No Overrides
Crossover
P Blocked, A or B to T
Valve Type
High-Performance
Solenoid Code
B
EN Code
None
Port T Code
6
Housing Code
J
Electrical Connection
No Connector
Electrical Options
None
Solenoid Indicator Lights Code
None
AC/DC
AC
Port Restrictor Plugs
None
Solenoid
Double
Electrical Connector Code
None
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Pilot/Drain
None
Coil Type Code
F
Manual Override Option Code
None
Spool Indicator Switch Code
None
Reducer Module
N/A
Function Code
6
Spool Spring Arrangement Code
C
Response Type
Standard Response
Center Position
P Blocked, A & B to T
Design No.
60
Voltage & Frequency
110/120 VAC – 50/60 Hz
Cycle Rate [Max]
N/A
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Mechanical Options
None
Indicator Lights
No
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Seal Material
Buna-N
Solenoid Energization Code
None
Surge Suppressor/Damper
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back