These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
None
Operation
Solenoid Operated
Coil Rating Code
G
Port T Code
7
AC/DC
DC
Function Code
2
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Manual Override Option Code
None
Function
3-Position Spring Centered
Spool Indicator Switch Code
None
Solenoid Code
G
Valve Type
High-Performance
Electrical Options
None
Design No.
60
Pilot Valve Type
N/A
Solenoid Energization Code
None
Crossover
All Ports Blocked
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Spool Spring Arrangement Code
C
Spool Shift Timing
N/A
Electrical Connection
DIN 43650
Seal Material
Buna-N
Electrical Connector Code
None
Port Restrictor Plug Code
None
NFPA Size
D03
Solenoid
Double
Solenoid Indicator Lights Code
None
EN Code
None
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Coil Type Code
U
Cycle Rate [Max]
N/A
Spool Code
2
Center Position
All Ports Blocked
Coil Type
DIN 43650
Voltage & Frequency
12 VDC
Actuator Type
Solenoid
Mechanical Options
None
Overrides
No Overrides
Response Type
Standard Response
Pressure [Max]
5075 psi
Indicator Lights
No
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
