These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
Crossover
All Ports Blocked
Response Type
Standard Response
Rated Flow [Max]
21 gal/min
Seal Material
Buna-N
Function Code
2
Pressure [Max]
5075 psi
Design No.
60
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
NFPA Size
D03
Spool Code
2
Manual Override Option Code
None
AC/DC
AC
Electrical Connector Code
None
Solenoid
Single
Function
2-Position Spring Offset, End to Center
Coil Rating Code
B
Valve Type
High-Performance
Coil Type
DIN 43650
Coil Type Code
U
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
EN Code
None
Overrides
No Overrides
Electrical Connection
DIN 43650
Spool Indicator Switch Code
None
Port T Code
6
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Housing Code
None
Pilot/Drain
None
Indicator Lights
No
Electrical Options
None
Mechanical Options
None
Center Position
All Ports Blocked
Port Restrictor Plugs
None
Operation
Solenoid Operated
Solenoid Code
B
Spool Spring Arrangement Code
B
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
