These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Shift Timing
N/A
Electrical Connector Code
None
Crossover
All Ports Open
Operation
Solenoid Operated
Electrical Connection
DIN 43650
Indicator Lights
No
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Manual Override Option Code
None
Port T Code
6
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Seal Material
Buna-N
Coil Rating Code
B
Valve Type
High-Performance
Function
2-Position Spring Offset, End to Center
Center Position
All Ports Open
Overrides
No Overrides
Coil Type
DIN 43650
Port T Pressure Rating
3000 psi
NFPA Size
D03
Housing Code
None
Port Restrictor Plug Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Solenoid Indicator Lights Code
None
AC/DC
AC
Spool Code
0
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
EN Code
None
Electrical Options
None
Coil Type Code
U
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
B
Pilot/Drain
None
Solenoid Code
B
Solenoid
Single
Design No.
60
Pressure Port Check Valve Pressure
N/A
Response Type
Standard Response
Actuator Type
Solenoid
Reducer Module
N/A
Function Code
0
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
