These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Blocked
Port T Code
7
Actuator Type
Solenoid
AC/DC
DC
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Crossover
All Ports Blocked
Voltage & Frequency
12 VDC
Spool Shift Timing
N/A
Design No.
60
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper
None
Solenoid
Single
Function Code
2
Operation
Solenoid Operated
Electrical Connector Code
None
Coil Type
DIN 43650
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
Spool Spring Arrangement Code
A
Port Restrictor Plugs
None
Solenoid Code
G
Pressure [Max]
5075 psi
Manual Override Option Code
None
Seal Material
Buna-N
Housing Code
None
Function
2-Position Spring Offset, End to End
Spool Code
2
Valve Type
High-Performance
Spool Indicator Switch Code
None
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Indicator Lights
No
EN Code
None
Coil Type Code
U
Coil Rating Code
G
Pilot Valve Type
N/A
Electrical Connection
DIN 43650
Mechanical Options
None
Electrical Options
None
Response Type
Standard Response
Pilot/Drain
None
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
