These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
DC
Voltage & Frequency
24 VDC
Actuator Type
Solenoid
Response Type
Standard Response
Crossover
All Ports Open
Cycle Rate [Max]
N/A
Solenoid
Single
Electrical Connection
DIN 43650
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Pilot/Drain
None
Function
2-Position Spring Offset, End to Center
Solenoid Indicator Lights Code
None
Indicator Lights
No
Overrides
No Overrides
Spool Indicator Switch Code
None
EN Code
None
Coil Type Code
U
Spool Shift Timing
N/A
Center Position
All Ports Open
Function Code
0
Coil Type
DIN 43650
Design No.
60
Electrical Options
None
Manual Override Option Code
None
Solenoid Energization Code
None
Mechanical Options
None
Pilot Valve Type
N/A
Electrical Connector Code
None
Spool Spring Arrangement Code
B
Reducer Module
N/A
Spool Code
0
Pressure Port Check Valve Pressure
N/A
Seal Material
Buna-N
Port T Code
7
Port Restrictor Plugs
None
Solenoid Code
H
Surge Suppressor/Damper
None
Valve Type
High-Performance
Operation
Solenoid Operated
Rated Flow [Max]
21 gal/min
Coil Rating Code
H
NFPA Size
D03
Housing Code
None
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
