Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Actuator Type | Solenoid |
| Response Type | Standard Response |
| AC/DC | AC |
| Indicator Lights | No |
| Electrical Options Code | None |
| Electrical Options | None |
| Pilot Valve Type | N/A |
| Valve Type | Standard-Duty |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Operation | Solenoid Operated |
| Mechanical Options | None |
| Crossover | P Blocked, A or B to T |
| Cycle Rate [Max] | N/A |
| Port T Pressure Rating | 1000 psi |
| Spool Code | 6 |
| Spool Spring Arrangement Code | C |
| Pilot/Drain | None |
| Center Position | P Blocked, A & B to T |
| Seal Material | Buna-N |
| Port Restrictor Plugs | None |
| Electrical Connection | Ground Terminal |
| Overrides | No Overrides |
| Mechanical Options Code | None |
| Pressure [Max] | 3000 psi |
| Design No. | 50 |
| Surge Suppressor/Damper | None |
| NFPA Size | D05 |
| Pressure Port Check Valve Pressure | N/A |
| Solenoid | Double |
| Rated Flow [Max] | 20 gal/min |
| Coil Rating Code | None |
| Coil Type | No Coil |
| Reducer Module | N/A |
| Solenoid Air Gap Code | None |
| Flow Direction Code | 4 |
| Function | 3-Position Spring Centered |
| Weight | 10.0 LB |
