These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
DC
Reducer Module
N/A
Electrical Connection
DIN 43650
Operation
Solenoid Operated
Rated Flow [Max]
21 gal/min
Spool Code
66
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
EN Code
None
Valve Type
High-Performance
Solenoid
Double
Solenoid Indicator Lights Code
None
Electrical Options
None
Function
3-Position Spring Centered
Spool Spring Arrangement Code
C
Housing Code
None
NFPA Size
D03
Seal Material
Buna-N
Spool Indicator Switch Code
None
Voltage & Frequency
24 VDC
Indicator Lights
No
Crossover
P Blocked, A or B to T
Center Position
P Blocked, A & B to T
Surge Suppressor/Damper
None
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Port T Code
7
Response Type
Standard Response
Solenoid Code
H
Coil Type Code
U
Spool Shift Timing
N/A
Function Code
66
Pressure [Max]
5075 psi
Pilot/Drain
None
Coil Type
DIN 43650
Mechanical Options
None
Electrical Connector Code
None
Cycle Rate [Max]
N/A
Coil Rating Code
H
Pilot Valve Type
N/A
Design No.
60
Overrides
No Overrides
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
