These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Center Position
All Ports Blocked
Cycle Rate [Max]
N/A
Solenoid Code
H
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
None
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Actuator Type
Solenoid
Coil Type
Connector Fitted w/Lights
Port Restrictor Plugs
None
Coil Rating Code
H
Valve Type
High-Performance
Solenoid
Double
Indicator Lights
No
Operation
Solenoid Operated
NFPA Size
D03
Design No.
60
Function Code
2
Pressure [Max]
5075 psi
Response Type
Standard Response
Surge Suppressor/Damper
None
Solenoid Energization Code
None
Overrides
No Overrides
Crossover
All Ports Blocked
Electrical Options
None
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
AC/DC
DC
Coil Type Code
U6
Housing Code
None
Port T Pressure Rating
3000 psi
Function
3-Position Detented
Reducer Module
N/A
Voltage & Frequency
24 VDC
Mechanical Options
None
EN Code
None
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
N
Spool Shift Timing
N/A
Port T Code
7
Electrical Connection
Connector Fitted w/ Lights
Pilot/Drain
None
Seal Material
Buna-N
Spool Code
2
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
