- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Function | 3-Position Spring Centered |
| Pilot/Drain | Internal Pilot/External Drain |
| Pressure Port Check Valve Pressure | 5 psi |
| Indicator Lights | No |
| Tank Port Rating | 5000 |
| Spool Code | 2 |
| Seal Material | Buna-N |
| Solenoid Energization Code | None |
| Valve Type | Standard-Duty |
| Reducer Module | No |
| Pilot Pressure Code | None |
| Overrides | Plain Override Solenoid Ends |
| Mechanical Options Code | None |
| Manual Override Option Code | None |
| Mechanical Options | None |
| Housing Code | W |
| NFPA Size | D08 |
| Temperature Range [Max] | 230 °F |
| Compatible Fluids | Petroleum Oil |
| Electrical Options Code | None |
| Coil Rating Code | B |
| Response Type Code | None |
| Surge Suppressor/Damper Code | None |
| No. of Stages | Two Stage |
| Gauge Ports Code | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Temperature Range [Min] | -40 °F |
| Pilot Valve Type | CETOP 3, Standard Performance |
| Response Type | Standard Response |
| Fluid Cleanliness | 19/17/14 micron |
| Actuation Identification | Solenoid A, Solenoid B |
| Pressure Port Check Valve Code | K |
| Model No. | DG5V-8-S-2C-K-M-FW-B-10 |
| Gauge Port | SAE-4 |
| Port Restrictor Plug Code | None |
| Spool Spring Arrangement Code | C |
| Electrical Connection | No Connector |
| Reducer Module Code | None |
| Design No. | 10 |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Coil Type Code | F |
| AC/DC | AC |
| Manual Override | Plain Override |
| Leakage | Standard Performance |
| Operation | Pilot Operated |
| Port Restrictor Plugs | None |
| EN Code | None |
| Crossover | All Ports Blocked |
| Electrical Options | None |
| Mounting | Subplate/Manifold Mount |
| Spool Control Modification Code | None |
| Port T Pressure Rating | 5000 psi |
| Actuator Type | Solenoid |
| Rated Flow [Max] | 175 gal/min |
| Pilot Valve Type Code | S |
| Performance | Standard Performance |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Solenoid | Double |
| Center Position | All Ports Blocked |
| Body Material | Ductile Iron |
| Surge Suppressor/Damper | None |
| Spool Indicator Switch Code | None |
| Electrical Connector Code | None |
| Solenoid Indicator Lights Code | None |
| Pressure [Max] | 5000 psi |
| Pilot Drain Code | None |
| Weight | 35.0 LB |

