These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
DIN 43650
Indicator Lights
No
Actuator Type
Solenoid
AC/DC
DC
Solenoid Energization Code
None
Port Restrictor Plugs
None
Spool Code
2
Pilot Valve Type
N/A
Voltage & Frequency
24 VDC
Cycle Rate [Max]
N/A
Center Position
All Ports Blocked
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Coil Type Code
U
EN Code
None
Function Code
2
Reducer Module
N/A
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Spool Spring Arrangement Code
C
Overrides
No Overrides
Solenoid
Double
Crossover
All Ports Blocked
Design No.
60
Pilot/Drain
None
Surge Suppressor/Damper
None
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Coil Type
DIN 43650
Port T Code
7
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Function
3-Position Spring Centered
Seal Material
Buna-N
Manual Override Option Code
Z
NFPA Size
D03
Solenoid Code
H
Spool Indicator Switch Code
None
Spool Shift Timing
N/A
Electrical Connector Code
None
Port T Pressure Rating
3000 psi
Coil Rating Code
H
Operation
Solenoid Operated
Pressure [Max]
5075 psi
Housing Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
