These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Design No.
61
Pilot/Drain
None
Crossover
All Ports Open, Restricted
Mechanical Options
None
Cycle Rate [Max]
N/A
Coil Rating Code
HL
Housing Code
W
Port Restrictor Plugs
None
NFPA Size
D03
Pilot Valve Type
N/A
Seal Material
Buna-N
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Surge Suppressor/Damper
None
Solenoid
Double
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Valve Type
High-Performance
Electrical Connector Code
T
Port T Code
7
Manual Override Option Code
None
Solenoid Energization Code
V
Port T Pressure Rating
3000 psi
Spool Code
8
EN Code
None
Rated Flow [Max]
21 gal/min
Function
3-Position Spring Centered
Spool Spring Arrangement Code
C
Actuator Type
Solenoid
Reducer Module
N/A
Coil Type Code
F
Operation
Solenoid Operated
Function Code
8
Solenoid Code
HL
Response Type
Standard Response
Solenoid Indicator Lights Code
L
Electrical Connection
Wired Terminal Block
Indicator Lights
Yes
AC/DC
DC
Center Position
P to T, A & B Blocked
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
Spool Indicator Switch Code
None
Voltage & Frequency
24 VDC, Low Power Coil
Overrides
No Overrides
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back