These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure Port Check Valve Pressure
N/A
Solenoid
Double
Reducer Module
N/A
Function
3-Position Spring Centered
Pressure [Max]
5075 psi
Manual Override Option Code
None
Electrical Connection
Wired Terminal Block
Design No.
60
Solenoid Indicator Lights Code
L
Seal Material
Buna-N
Spool Spring Arrangement Code
C
Rated Flow [Max]
21 gal/min
Port T Code
6
Indicator Lights
Yes
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Mechanical Options
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Crossover
P Blocked, A or B to T
Voltage & Frequency
110/120 VAC – 50/60 Hz
AC/DC
AC
Cycle Rate [Max]
N/A
Solenoid Code
B
EN Code
None
Solenoid Energization Code
None
Pilot/Drain
None
Coil Type Code
F
Valve Type
High-Performance
Actuator Type
Solenoid
Coil Rating Code
B
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Function Code
66
Response Type
Standard Response
Port Restrictor Plug Code
None
Pilot Valve Type
N/A
Electrical Connector Code
T
NFPA Size
D03
Housing Code
W
Overrides
No Overrides
Electrical Options
None
Port T Pressure Rating
3000 psi
Spool Code
66
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back