These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Solenoid Code
B
Spool Spring Arrangement Code
AL
Solenoid
Single
Port Restrictor Plug Code
None
Actuator Type
Solenoid
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Cycle Rate [Max]
N/A
Crossover
All Ports Blocked
Solenoid Indicator Lights Code
L
Coil Rating Code
B
Electrical Connector Code
T
Reducer Module
N/A
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
NFPA Size
D03
Seal Material
Buna-N
Pilot Valve Type
N/A
Spool Code
2
Port T Code
2
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Surge Suppressor/Damper
None
Spool Indicator Switch Code
S5
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Response Type
Standard Response
Electrical Connection
Wired Terminal Block
Spool Shift Timing
N/A
Indicator Lights
Yes
Function Code
2
Port T Pressure Rating
150 psi
AC/DC
AC
Operation
Solenoid Operated
Electrical Options
None
EN Code
None
Function
2-Position Spring Offset, End to End
Center Position
All Ports Blocked
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Valve Type
High-Performance
Solenoid Energization Code
None
Housing Code
W
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back