These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Pilot/Drain
None
Spool Indicator Switch Code
S5
Spool Code
2
Electrical Connector Code
T
Indicator Lights
Yes
Solenoid Code
H
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Coil Type Code
F
Manual Override Option Code
None
Function
2-Position Spring Offset, End to End
Center Position
All Ports Blocked
Housing Code
W
NFPA Size
D03
Solenoid Indicator Lights Code
L
Port T Pressure Rating
150 psi
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Electrical Options
None
Actuator Type
Solenoid
Solenoid Energization Code
None
Overrides
No Overrides
Crossover
All Ports Blocked
Function Code
2
Port Restrictor Plug Code
None
Response Type
Standard Response
EN Code
None
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Reducer Module
N/A
Spool Spring Arrangement Code
A
Valve Type
High-Performance
Solenoid
Single
Electrical Connection
Wired Terminal Block
Coil Rating Code
H
Voltage & Frequency
24 VDC
Port T Code
2
Spool Shift Timing
N/A
Design No.
60
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
