These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Cycle Rate [Max]
N/A
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Electrical Connection
DIN 43650
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Indicator Lights
No
Spool Shift Timing
N/A
Solenoid
Single
Port Restrictor Plugs
None
Crossover
All Ports Open
Surge Suppressor/Damper
None
Coil Rating Code
H
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Port T Code
7
Electrical Options
None
Manual Override Option Code
None
Solenoid Energization Code
V
Pilot/Drain
None
Spool Spring Arrangement Code
BL
Valve Type
High-Performance
Function
2-Position Spring Offset, End to Center
Port Restrictor Plug Code
None
Mechanical Options
None
Design No.
60
Housing Code
None
Overrides
No Overrides
Seal Material
Buna-N
Spool Code
0
Function Code
0
EN Code
None
Coil Type
DIN 43650
Coil Type Code
U
Center Position
All Ports Open
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Pressure [Max]
5075 psi
AC/DC
DC
Reducer Module
N/A
NFPA Size
D03
Voltage & Frequency
24 VDC
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Solenoid Code
H
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
