Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| RPM [Max] | 792 rpm |
| Port Size & Location | SAE-10 Side |
| Shaft Type | Straight w/ Woodruff Key |
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| Special Features | None |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| RPM [Min] | 792 rpm |
| Port Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 57 lpm |
| Paint Code | A |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Material | Cast Iron |
| Port Size | 7/8-14 |
| Motor Element | Gerotor |
| Output Shaft Code | 01 |
| Splines | 0 |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Corrosion Resistant | No |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.54 in |
| Mounting Type Code | REF! |
| Special Features Hardware Code | 00 |
| Pressure [Max] | 2000 psi |
| Displacement (in³/rev) | 4.6 |
| Bolt Circle Dia. | 4.19 in |
| Series | S Series |
| Case Drain Code | 1 |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Weight | 29.0 LB |
