Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Output Torque at Rated PSI (inch/pounds) | 4672 in lb |
| Bolt Circle Dia. | 4.19 in |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | REF! |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Port Type | Manifold |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Series | S Series |
| Case Drain Code | 0 |
| Flow Rate | 15 gal/min |
| Port Code | C |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1300 psi |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 153 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Hardware Code | 00 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Special Features | None |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Motor Element | Gerotor |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| RPM [Min] | 153 rpm |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Displacement (in³/rev) | 22.6 |
| Case Drain | None |
| RPM [Max] | 153 rpm, 371 rpm |
| Weight | 29.0 LB |
