Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 4.52 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| RPM [Max] | 760 rpm |
| Shaft Type | Straight w/ Cross Hole |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Seal Options Code | 04 |
| Mounting Holes | 0.535 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Port Size | SAE-10 |
| Pilot Diameter | 3.25 in |
| Series | H Series |
| RPM [Min] | 760 rpm |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 1 |
| Shaft Size & Type | 1 in Straight With .31 Dia. Cross Hole |
| Speed Sensor Options Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Splines | 0 |
| Port Type | SAE O-Ring |
| Geroter/Geroler Options Code | 0 |
| Bolt Circle Dia. | 4.187 in |
| Displacement (in³/rev) | 4.52 |
| Special Features Hardware Code | 00 |
| Port Size & Location | SAE-10 Side |
| Seal Material | Viton |
| Mounting Type Code | AA |
| Manifold Options Code | 0 |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Case Drain | SAE-4 |
| Mounting Hole Size | 0.565 in |
| Shaft Options Code | 0 |
| Material | Cast Iron |
| Flow Rate | 57 lpm |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Port Code | AA |
| Output Shaft Code | 07 |
| Weight | 0.0 LB |
